interessant topic, hier was ik naar op zoek.
Ik heb had in GEZOCHT een single plane manifold gevraagd en kreeg al snel een Victor Jr aangeboden. Op Ozrodders.com las ik juist dat je met een IMPCO425 de manifold moet kiezen die je grootste single plenum biedt en langste runners...32coupe heeft daar zelfs een dubbele tunnel ram erop gezet.
http://www.ozrodders.com/forum/viewtopi ... =1&t=44192
of dit topic:
http://www.ozrodders.com/forum/viewtopi ... =5&t=27604
My $0.02 worth on "big" manifolds
Petrol is naturally a liquid at ambient temprature.
A carburetor takes the liquid fuel and puts it into a vapour form, as small droplets suspended in a moving stream of air
The fuel will only stay in suspension if the air flow is kept at a given rate.
With big tunnel rams and large single plane manifolds, you need to keep the revs up for the fuel to stay in suspension
At low rpm, the air flow drops below the threshold flow level, and the fuel drops out of suspension and pools as a liquid at the low spots in the manifold.
This is why they cough and fart at low rpm
The bigger the plenum change in the manifold, the higher the air flow required to keep a liquid fuel in suspension.
This is why tunnel rams are considered "race only" when running a liquid fuel
LPG on the other hand is a gas at ambient temprature and above.
The only thing that will turn it back into a liquid is a few hundred PSI of pressure, or extreme cooling.
So it doesn't matter how big your manifold is, or how slow the air speed gets ............. it's a gaseous fuel and can't pool in the manifold.
So ignore everything you "know" about manifolds, air flow rates etc etc
JUST fit the biggest fucker of a manifold you can find and wack a 425 or two on top
iemand hier al eens mee ge-experimenteerd?
Ik heb nu een paar opties:
1. 1 inch open spacer op mijn huidige dual plane manifold, maar dan komt mijn tv-kabel schuin te staan.
2. tussenschot van huidige dual plane eruit slijpen...iemand dat al eens gedaan? ik ga toch nooit meer op benzine rijden...
3. Edelbrock Victor Jr kopen die me is aangeboden. Lees op sommige plekken dat die single plane niet groot genoeg kan zijn met een IMPCO425 erop.
4. kleinere nieuwe of 2ehands single plane manifold zoeken...